Auxiliary Equipment for Plastic Recycling
Do not hesitated to contact us if there is any question. Tel：+86 186 6223 7211，Email: [email protected]
Saving space(EPS only occupy 2%-5% of driginal space after compacting)
Highiy compacting ratio(density will be 250kg/m³-400kg/m³ after compacting)
Compression block after compacting is easy to cut and pile up
Quiet operation(Noise is less than 76 db)
Feeding port can be customized,power/electric control system can be replaced
It is profitable,you can quickly get return on investment
Many different model with different capacity are selectable,suitable for many
different work place
Removed to replace the angle,until all sides sharpening blunt after blunt.Claw knife rotary cutting,fixed knife and the knife
is the Japan imports SKD11 the material,after heat treatment,hardness of HRC60 °.Therefore long service
life,cuttingability,highcapacity.The normal useof 1,000 tons or more before they need sharpening.The
normal useof 1,000 tons or more before they need sharpening.Sec crusher Airways fanbe used in
conjunction with conveyor belt,up to automation,ration alization and labor saving.Reduce labor intensity,
improve the working environment.
The factory absorbed foreign advanced technology developed a series of high-speededdy Mill micro milling equipment used in plastics, mining,chemical,metallurgical and other industries.Processing polished thermoplastic PVC/PE plastic recycling graingrinding.Provedby the practice factory of plastic products,the grinding powder processing for mulations the addition of 20% -30%,its chemical and physical properties of the products remains the same indicators of new material.
The factory absorbed advanced technology from Germany developed a series of milling machine is suitable for PTFE ABS PPR PVC-V PE cartire rubber orplasticsuccessfulgrindingthrough a trial.Proved by practice factory of plastic products,grinding powder processing recovery 20% -30%.The chemical and physical properties of its products remains the same indicators of new material,so the fall of the savings to solve the waste the defective accumulation troubled best equipment for plastic factory.
1.Crushing,mixing, coloring at one time;
2.Machines small footprint;
3.The mechanical structure is simple,easy to operate;
4.Blade gap is adjustable,tool change;
5.High production efficiency,low-energy(one tonper day,thepower consumption is 200 degrees);
6.Low granulated, does not destroy the molecular structure of raw materials, without damaging the physical properties;
The device is an important part of the waste plastics recycling equipment,the flat piece of old plastic can be packaged into blocks and big-ticket items.
The high degree of automation equipment,easy to operate.
1.Grinder body design,a change inthe original the loose frame structure for the closed steel plate welded structure.Greatly improve the strength of the body, increasing and prolonging its life.
2.Alter the belt drive transmission parts for rack drive to overcome the uneven walking speed of placement,its reliability and stability.
3. Changed grinder grinding head swivel rotary angle 30 °swivel rotary angleg reater than 90 °of the originaldesign,so that the upper and lower parts and replace the grinding wheel is more convenient and faster.
Structural composition and features:
1.Rackc leaning tank cleaning screw drive system composed.
2.Cleaning tank:bottom of the cleaning tank drainage device, easy the sewage clean up after work for some time.
3.Cleaning screw:for feeding and cleaning,screw welded equidistant helical blade,it is a good bottle chip forward transport.
4.Drivetrain:motor and pulley connected to drive the rotation of the screw,the screwto maintain constant speed.
Waste plastic film crushing washing drying recycling equipment through the introduction, digestion and absorption of advanced concepts and technologies in the international industry,combined with today's development needs and characteristics of the waste plastic secondary applications developedmade.To meet the domestic and international environmental protection requirements on waste plastics recycling processing.
The entire production line from the beginning to the finished product,can be very easy to clean the waste plastic products.
1.Filmd ehydration drying system for drying of the broken washing the PET bottle chip.
2.Film dehydration drying system, energy saving drying effect.
- Auxiliary Equipment for Plastic Recycling
- Mixer & Bulk Handling System
- Automatic Weighing, Mixing & Conveying System
- Filter & Dust Collector
- Extruder & Plastic Extrusion Line
- Pipe Extrusion Production Line
- Board/Plate Production Line
- Profile Extrusion Line
- Auxiliary Machine for Extrusion
- Plastic Recycling Machine
- Shredder & Crusher
- Crushing Washing and Drying Line
- Plastic pelletizing system
- Contact Us
- Tel: +86 512 8959 8269
- Fax: +86 512 8959 8260
- 7*24 Hotline: +86 186 6223 7211
- Email:[email protected]